hello! welcome to dongguan golden electric co., ltd.!
  • hotline:

    barry: 86 136-0967-2291
    jony: 86 151-1848-1483

  • 手机站
  • 阿里巴巴
current location:home » new » more

how to set up the electromagnetic relay?-买球软件

share to:
hits:  updatetime:2019-11-21 11:29:43  【】  【】
the structure and working principle of the electromagnetic relay are similar to those of the contactor, and are mainly composed of an electromagnetic mechanism and a contact. electromagnetic relays are also available in both dc and ac.
the suction and release values of the relay can be adjusted within a certain range according to the protection requirements. the dc electromagnetic relay shown is taken as an example for illustration.

(1) adjust the operating current (voltage) by turning the adjusting nut and adjusting the tightness of the reaction spring. the larger the spring reaction force, the larger the operating current (voltage), and vice versa.
(2) change the thickness of the non-magnetic spacer. the thicker the non-magnetic spacer, the larger the air gap and reluctance of the magnetic circuit after the armature is attracted, and the larger the release current (voltage), and the smaller the opposite, the smaller the attraction value.
(3) adjust the screw to change the size of the initial air gap. when the reaction spring force and the non-magnetic spacer thickness are constant, the larger the initial air gap, the larger the suction current (voltage), and vice versa, and the release value does not change.
previous:wiring method and wiring diagram of time relay  next:four steps to properly select the power relay

recommended products


recommended news


automotive relays and fuses have a common feature, both for safety, and the lack of understanding of circuit components, so some people are not very clear about the difference between the two. everyone can distinguish in appearance, and more is not understanding the principle of action. let me talk about the difference between car relays and fuses. an automotive relay is an electrical control device that is an electrical device that causes a predetermined step change in the controlled output quantity in an electrical output circuit when the change in the input amount (excitation amount) reaches a prescribed requirement. it has a control system (also known as an input loop) and a controlled system (also known as an output back)

  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21
  • 2019-11-21

contact uscontact us

service hot: 86 181-2432-3697 barry zu

e-mail:[email protected]

add:no. 4, minxing 3rd road, shangjiao community, chang and town, dongguan city

technical support:

mobile terminalmobile phone

高登手机postcards 高登微信wechat